PHD Website welcome you view!

CMD-6103 6 Channels Interpretation Unit

Core Technique:

1.Analogue audio transmission technology, traditional and stable
2.Low power consumption technology, powered directly by master not by itself.
3.Hand-in-hand technology
4.Digital tuning technology
5.High-fidelity microphone amplifier circuit

Function Description:

1.Ear enclosure headphone monitor
2.The system master PHD-CMD-6000 can connect 5 interpretation units at most for 6 languages simultaneous interpretation.
3.Indirect and direct interpretation function.
4.With mutual-lock function of the same channel, that is, the same channel can only transmit one interpreted language. When one interpretation unit set in one channel and open the microphone, other interpretation units can not open microphone in this channel.
5.Shortcut key “DIRECT”“INDIRECT” for the fast switch between original and interpreted language.
6.When the delegate’s speaking speed is too fast, press “SLOW” key to ask him to slow down.
7.Volume-adjusting knob can freely adjust and monitor the volume.
8.Two headphone jacks: one for original language channel—interpreter can listen through this jack and then interpret, the other is monitor channel—to monitor whether interpreter’s interpreted language output normally
9.13-core connection line (one male one female) in series-connected.
10.The unit is passive, and by the master, input voltage is 24v,in the safe range.
11.Simple operation: only press channel output button to set up the interpreted language output channel, no other settings; connect with headphone to adjust suitable volume; interpreter only need to press microphone ON button to begin speaking.
12.Cough cut key: when interpreter want to cough, only need to press COUGH CUT key to cut the output signal temporarily and not need to close microphone
13.LCD can display current monitor language channel and interpreted language output channel and its current operation information.

Technical Parameter:

power supply DC24V (powered by master)
unit interface DIN special interface
power consumption ≤2.5W
headphone output 9dBu，8－32Ω，3.5mm micro socket
loudspeaker power ≤2W
microphone type High dispersion electret
dispersion cordate
S/N ratio > 80dB
crossstalk attenuation > 80dB
distortion <1%
frequency response 60－12kHz
equivalent noise ≈20dB SPL
SPL max SPL 105dB（3% gate）
sensitivity －22dBv/Pa
dimension 247L x 155W x 60H (mm) color Grey