PHD-BP-9828ND   PHD-BP-9829   PHD-BP-9835ND   PHD-BP-9836 
Copyright© 2006 PHD Professional
Co.Ltd. All Rights Reserved
 
 
 
 
PDFDOWNLOAD










PHD-BP-9835ND
Construction:
BP9835ND consists of one 15" LF, one 10" enclosured MF and one 2.8" compressor driver, all speakers are made of high magnetic flux Neodymium as magnetic circuit system, effectively improve output sensitivity. MF and LF are all installed on the horn. MF is loaded with phase correction plate, makes its frequency much evenness. Built-in high quality passive frequency division for MF and HF, LF needs to connect with processor for frequency division.
Features:
3-way long-throw loudspeaker, power output with high sensitivity, coverage with far distance
professional flying setting with safety and reliability, easy to install Heat-resistant, equipped with BP9836 subwoofer system, frequency division with processor
Specifications:
Low Frequency:1 x 15(inch) 380 mm dia , 100 mm(4inch)voice coil dia
Mid Frequency:1 x 10(inch) 260 mm dia, 75 mm(3inch)voice coil dia
High Frequency:1 x 2.8(inch) 72 mm voice coil dia , 38 mm(1.5inch)throat dia

Frequency Response
Sensitivity
Nominal Impedance
Power Handing


Maximum SPL
Nominal Coverage Angle (-6 dB)
Crossover Frequency
Recommended High Pass Filter
Enclosure Construction
Finish
Grille
Suspension Hardware
Input Connectors
Dimensions (H x W x D）
Net Weight

 75 Hz - 18 kHz (±3 dB)
LF 102 dB , MF 106dB , HF 108 dB SPL (1W @ 1m)
LF 8 ohms , MF 8 ohms , HF 8 ohms
LF 500 watts (rms) , 1500 watts (peak)
MF 200 watts (rms) ,600 watts (peak)
HF 120 watts (rms) , 360 watts (peak)
LF 129 dB , MF 129 dB , HF 128 dB
60°horizontal， 40°vertical
MF/HF 1.2 kHz , MF/LF 330 Hz
high pass => 100 Hz , 24 dB/octave
18 mm birch plywood with structured
Wear-resistant textured black paint
Powder coated perforated steel,foam fronted 6 x 4-Position fly track
Speakon NL4 x 2
850 mm x 500 mm x 530 mm
65.5 kg
Frequency Response:   Line Pictuer: